红米5 Plus拆解 Redmi 5 Plus Dismantle

红米5Plus测评 Redmi 5 Plus Review

红米5拆解 Redmi 5 Dismantle

荣耀V10深度测评 Huawei Honor V10 Review

Do not buy from Aliexpress they sell inferior product

Anycast Firmware update 4.30 to 5.20

小米MIX2深度报告

小米Xiaomi Note3

魅蓝Note6 VS 小米5X测评

360Vizza对比红米Note5A

魅蓝Note6评测 Meizu Note 6 Review

Amazon Fire 7 Lineage 12.1 (2 Aug 2017)

Fresh installation from FireOS or other ROM FlashFire >= 0.57
- Click the Red + and choose 'Wipe'
- Ensure System data, 3rd party apps and Dalvik cache are CHECKED
- Click the Red + button and choose 'Flash ZIP/OTA'
- Navigate to and choose the latest Lineage ROM Zip
- Accept defaults
- Click the Red + button again and choose 'Flash ZIP/OTA'
- Navigate to and choose the latest Open Gapps Zip.
- Accept defaults
- Move "Wipe" to the Top of the order
- Press the big FLASH button.
- Ignore any warnings that appear

Amazon Fire 7 Nexus Rom 27 July 2017

Fresh installation from FireOS via FlashFire >= 0.57
- Click the Red + and choose 'Wipe'
- Ensure System data, 3rd party apps and Dalvik cache are CHECKED
- Click the Red + button and choose 'Flash ZIP/OTA'
- Navigate to and choose the latest Fire Nexus ROM Zip
- Accept defaults
- Move "Wipe" to the Top of the order
- Press the big FLASH button.
- Ignore any warnings that appear

小米5X对比OPPO R11上手评测 Xiaomi 5X vs Oppo R11

小米5X上手体验 Xiaomi 5X Review

Lenovo 联想 Folio 2017

OnePlus 5 Review 一加5深度评测

小米6 Xiaomi Mi 6

360N5评测 vs 魅蓝X vs 红米4

Amazon Fire 7 2015 TPU Case

Brought for $12.50 dated 8th March 2017, it help to keep your Amazon Fire 7 tablet protected in stylish tpu rubber case. It is made out of shock-absorbent, shatterproof TPU rubber which can also protect against scratches, soft impacts, resists dirt and stains. It is very slim with lightweight and also easy to snap-on and off within the tablet.

The TPU case also come with good quality workmanship and available in six bright and stylish vibrant colors for you to choose from.

小米Note 2 拆解 Xiaomi Note 2 Dismantle

小米5C上手体验 澎湃S1 处理器 Xiaomi 5C Surge S1

Installation Viper4Android 4.0-7.0

To install V4A, you must have a rooted phone. If you haven’t rooted yet, you can check for your device in our Rooting section.

Make sure no other audio mods are installed, like AudioFX. If there is, you will need to remove it completely. You must have BusyBox installed on your ROM.

In case the driver installation fails – It seems like some manufacturer specific devices require SELinux status to be set as Permissive. You can use SELinuxModeChanger app to do the required.

Steps To Install ViPER4Android On Marshmallow:

Go to the V4A website and download ViPER4Android FX: Link | Direct link

Move the downloaded ViPER4Android_FX_v2505_A4.x-A7.x.apk to the phone’s storage.

Make sure, you have enabled Unknown sources in Settings > Security.

Now, using a file manager (e.g ES File Explorer), install the apk manually, as you normally would do.

Once it has been installed, go to app drawer and run ViPER4Android FX.

When you will run the app for the first time, it will prompt you to install V4A drivers on your device, so tap on Yes. As soon as you tap, you will have to grant root permissions, so choose GRANT.
V4A app will automatically detect the system and install appropriate drivers for the mod to work properly, and upon completion, the following message will be displayed: ‘Driver installed, please reboot your device’. And now as advised, reboot your phone/tablet (I hope you know how to do that!).

When the device has rebooted, again launch ViPER4Android FX app.

Tap on the 3-dot menu button on the top-right of the app, and select Driver Status. It should display Status: Normal.


Last Update Log

Note: FX v2.3.2.5 onwards:
1. Fully support x86 platform, but not fully optimised yet. (Using VHS+/Convolver may increase battery usage)
2. Fully support true octa-core devices.
3. Correctly-installed Busybox is required before installing V4A.

If you see V4A installation pop-up loop, its probably due to incomplete root OR htc_audio_effects.confFX version: v2.5.0.5 (New package name! Please uninstall any previous version)
Android 7.0 Nougat users >>>> Try this fix apk: here.
!! Detailed update info >>> Read Joe's post: here.
0. Emergency fix v2504 - repair load file incompatibility issues.
1. New UI.
2.Add quad-ch convolver support (stereo convolver).
3.Add FET compressor.
4.Support change storage path.
5.Fix bugs.
----------------------------------
XHiFi version: Final v2.1.0.2-1 (discontinued)
1.Support for Android 4.3 (v2102-1)
2.No changes for Android 2.3 (2102)Downloads
Full download list at Official Website: http://vipersaudio.com/blog/?page_id=48
Note: Please connect to the internet when installing V4A. So we can count our users.
ViPER4Android FX
v2.5.0.5 (Android 4.0~7.0): Mediafire *ZIP Contains v2505 standard & v2505 nougat IO fix apk*
v2.4.0.1 (Android 4.0~6.0): Mediafire *Does't support below Android 4.0*
v2.3.4.0 (Android 2.3~5.0): Mediafire

ViPERsToolBox(For making custom DDC))
v2.0: Mediafire
v0.1: Dropbox (Joe)

ViPER4Android XHiFi
XHiFi version Final v2.1.0.2-1 (Android 2.3~4.3): Mediafire

红米Note4x对比 - 红米4、魅蓝Note5、Pro6Plus

魅蓝5s Meizu M5s

Anycast M2 Plus

A dongle that let you mirror your smartphone device to your Smart TV. To use this dongle device you need to have minimum android 4.4 kitkat. Bare in mind that not all smartphone device are compatible with Anycast M2 Plus.

There are 3 versions of Anycast M2 Plus

1.CPU AM8251 600Mhz DDR3 128 Nand Flash 128MB(2014 Old Version) IP: http://192.168.203.1

2.CPU AM8252 600Mhz DDR3 128 Nand Flash 128MB(2015 New Version) IP: http://192.168.203.1

3.CPU RK2928 1.2Ghz DDR3 256MB Nand Flash 256MB(2014 Version) IP: http://192.168.49.1

For android smartphone version with better performance, you must buy Anycast M2 Plus with CPU RK2928 1.2Ghz DDR3 256MB Nand Flash 256MB(2014 Version) IP: http://192.168.49.1

When using Miracast, there will be 1-2 second lag (1080P) and if you switch to DLNA using wifi to connect there is no lag occur.

Hardware specifications:
CPU: Single Core ARM Cortex A9 Rockchip RK2928 1.2 GHz.
GPU: 3D GPU 1 x mali 400.
OS: Linux 3.0.8.
DDR3: 256MB; Nand Flash: 256MB Support Airmirror, DLNA, Airplay Miracast.
Wi-Fi: 802.11b/g/n 150Mbps 2.4GHz.
Support WPS function, can fast connect with Router and AP compurgation.
Support Online & local (content wireless) display: Video/Audio/Photo/Office file/Website.
Office Software (Display Presentation): PDF/MS Word/MS Excel/MS Powerpoint/Keynotes.
Online streaming: Youtube, Netflix, Hulu Plus, IDMB, Quickflix, Family On TV etc.
Remote controller: Support by Phone/Labtop/Tablet PC.
Support Video Format: AVI/DIVX/MKV/TS/DAT/MPG/MPEG1,2,4/MP4/RM/RMVB/WMV.
Support Audio Format: MP1/MP2/MP3/WMA/OGG/ADPCM-WAV/PCM-WAV/AAC.
Support Photo Format: JPEG/BMP.
System supported: ANDROID,IOS,MAC,WINDOWS
System requirement:
IOS: IOS 7.0 or higher (Devices: For all iPhone model after iPhone4 / all iPad model after iPad 2 / all iPod touch after iPod touch 4th generation.
Resolution supported: iPhone (430 * 320 ~ 1136 * 640); iPad (1024 * 768 ~ 2048 * 1536)
Storage: At least 40MB free space needed.
Android: Support Android OS 4.2 with 1GB RAM.
Resolution supported: WVGA ~ 1080P.
Storage: At least 40MB free space needed.
Working distance: Up to 10m.
Projector: Support Projector with HDMI output interface.
Ultra low power consumption, and low heat.
With compact portable deign for easy carrying.

Specifications
Model Number: M2 Plus
Color: Black
Interface: 1 * HDMI 1.4; 1 * Micro USB 

Anycast M2 Plus Firmware Update

红米Note4X体验测评